Buffalo TeraStation, User Manual, Page: 43 / 160

TeraStation User Manual 42
Configure replication as described below.
1
2
Click Add .
3
4
Read the alert message carefully and click OK .
Replication is configured.
Replication to a TeraStation on a different network
If your target TeraStation is on a different network or subnet, you may still configure replication as described above, but
you must first add the target TeraStation to your list of off-subnet TeraStations as described below.
1
2
3
Click Close .
You can now configure Replication as described in the previous section.
1 Select replication source folder for Backup Source.
2
Select replication target folder for Backup Targets.
3
Click Save .
In the source TeraStation’s settings, click System - Backup - Replication .
In the source TeraStation’s settings, navigate to System - Backup . Click View
NAS Devices .
Under “Off Subnet TeraStations”, enter the target TeraStation’s IP address
in the “New IP Address” field. Click Add .
Note: If the Target TeraStation is behind a router, enter the router’s WAN
side IP address. You will need to map ports 873, 22938, and 22939 to the
target TeraStation in the router for this to work correctly.