Buffalo TeraStation User Manual Download Page 116

Page: 116 / 160

TeraStation User Manual

115

Name

Descriptions

Map Share*

Assigns the searched TeraStation’s shared folder as a network drive.

Disconnect Share*

Unmaps the network drive.

Map All Remote Shares to

Drive Letters

Assigns the all TeraStation’s shared folders found as a network drive.

Create Desktop Shortcut* Creates the shortcut icon to searched TeraStation’s shared folder (share).
Launch NAS Navigator2

on startup

Launches NAS Navigator2 when Windows is booted.

Display Errors

Displays an error message on NAS Navigator2 icon in the task tray when an

error occurs.

Properties *

Opens the selected TeraStation’s Properties window.

Closes NAS Navigator2 window.

View

Icon

: Displays icon for ease.

Details

: Displays Name, Product Name, Workgroup, IP Address, Subnet Mask,

and Default Gateway.

Sort by

Selects the sort order from following to display when multiple TeraStations

are found:

Host Name, Product Name, Work group, IP Address, Subnet Mask, and Default

Gateway

Browse*

Opens the displayed shared folder on the TeraStation.

Refresh

Searches the TeraStation again.

I’m here (*)

Ring a tone from the TeraStation when click it (This option is disabled if the

product does not support this feature).

* Click your TeraStation’s icon to display these options.

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands