TeraStation User Manual
23
Using RAID 10 mode
1
Change system to normal mode (page 20).
2
3
4
5
Note:
After the RAID array is changed, the TeraStation will perform a RAID check that will take about 5 hours per TB. File
transfers will be slower during this period. While the “RAID ARRAY x Resyncing” message is displayed on the LCD
screen, do not turn off the TeraStation. If you turn it off, the RAID check will start over.
6
The Confirm Operation screen will appear.
Enter the number shown in the Confirmation Number field within 60 seconds, and click
Apply
.
7
Follow the instructions displayed on the screen.
You have now set up a RAID 10 array. Turn to page 47 to create a shared folder.
Click the array you want to configure.
Select hard drives (all 4 of them) to use in RAID 10.
1
Select
RAID 10
.
2
Click
Create Raid Array
.
Click
System
-
Storage
-
RAID Array
in Settings.
