Buffalo TeraStation User Manual Download Page 39

Page: 39 / 160

TeraStation User Manual

Using TeraStation Batch Backup

Batch backup allows backup of shared folders from multiple TeraStations to a single TeraStation. Configure this as

described in step 3 on page 32. To configure a TeraStation to be the backup destination, make the settings as described

on pages 32, 35, and 36.

Notes:

In the cases below, a TeraStation cannot be selected as the backup source as described in step 4 on page 36. If this

happens, change the settings as described on page 34.

• If a password has been set for a TeraStation designated as a backup source.

• If the source TeraStation and the backup destination TeraStation are not on the same subnet.

Batch Backup of TeraStations

Division 1

Division 2

Division 3

Management Division

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands