Buffalo TeraStation User Manual Download Page 44

Page: 44 / 160

TeraStation User Manual

Time Machine

Time Machine is a backup program included with OS X 10.5 or later. To use it with the TeraStation, configure the

TeraStation as described below.

From the Apple menu, select

System Preferences

Check

Apple

under "Shared Folder Support".

Click

Save

In Settings, navigate to

Network

Settings

Network Services

and click

AFP

Select

Enable

and click

Save

Note:

Settings for both LAN Port 1 and 2 are the same (ports cannot be

configured separately).

Navigate to

Shared Folders

Folder Setup

Choose a shared folder to configure as a backup destination for Time

Machine.

Navigate to

Extensions

Time Machine

Click

Modify Settings

Select

Enable

Select the shared folder that you set in step 3.

Click

Save

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Buffalo TeraStation, User Manual, Page: 44 / 160

Search results

Summary of Contents for TeraStation

Reviews: