Buffalo TeraStation User Manual Download Page 33

Page: 33 / 160

TeraStation User Manual

Chapter 6
Backup

Back Up from your Windows PC

• Configure Destination for Backup

Before backing up to a TeraStation, configure a folder on the TeraStation as a backup destination.

Click

Save

at the bottom of the screen.

You can back up folders on the TeraStation to any of the following destinations:

• Another TeraStation (instructions on pages 32, 34, and 35)

• A different folder on the same TeraStation (instructions on pages 32 and 35)

• A USB hard drive connected to the TeraStation (instructions on page 35)

Choose the folder you want to set as a backup destination.

To back up data from your PC to the TeraStation, use the backup program, included with your TeraStation. The backup

software can be installed from your TeraNavigator CD.

Check

Disk Backup

from “Shared Folder Support”.

Note:

To configure a password for backup jobs to this share, enter it in the

“Remote backup password” field. If you do not want to set a password, do

not enter anything.

Back Up from the TeraStation

In Settings, click

Shared Folders

Folder Setup

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands