Buffalo TeraStation User Manual Download Page 66

Page: 66 / 160

TeraStation User Manual

RAID Scanning

RAID Scanning allows regular scans of your RAID arrays to be configured to run automatically. Errors will be fixed as they

are found if possible.
For best results, schedule regular RAID scans if you use RAID arrays in your TeraStation.

You have configured RAID Scanning.

Click

Enable

Select your desired schedule for RAID Scanning Schedule.

Notes:

•Select

Shut Down

to have the TeraStation shut down automatically when

an error is detected.

• If

Begin Immediate RAID Scan

is selected, then a RAID scan will begin

immediately.

• To stop a RAID scan, click

Abort RAID Scanning

Click

Save

In Settings, click

System

Storage

RAID Scanning

Click

Modify Settings

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands