Buffalo TeraStation User Manual Download Page 16

Page: 16 / 160

TeraStation User Manual

Launch NAS Navigator2.

Note:

•

For Windows computers, double-click the

Buffalo NAS Navigator2

icon on the Desktop.

•

For a Mac, double-click the

NAS Navigator2

icon in the Dock.

The TeraStation’s Shared folders are displayed.

Note:

With a Mac, the TeraStation is mounted as a drive icon on the desktop, and displayed in the

sidebar of the Finder.

You can now use the TeraStation’s shared folders to save files just like other hard drives.

Double-click the TeraStation icon.

Adding Additional TeraStations

Run the TeraNavigator installation program from the CD for each TeraStation that you add to the
network. You cannot set up multiple TeraStations at the same time.

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands