Buffalo TeraStation User Manual Download Page 89

Page: 89 / 160

TeraStation User Manual

Setting up a printer on Windows XP

Refer to your printer’s manual installation instructions. You may need to install the printer driver from a software

disk.

Click

Start

Control Panel

Click

Network and Internet Connections

icon.

Double-click

My Network Places

View workgroup computers

- (Name of the TeraStation Server name) in this order.

If “The printer driver to your computer will be automatically installed. (...) Would you like to continue?” is

displayed, click

Yes

You have added a printer.

Choose

Enable

and click

Save

Double-click the TeraStation’s printer icon (“lp”).

In Settings, navigate to

Extensions

PrintServer

and click

Modify Settings

Select your printer. Choose the manufacturer on

the left and the model on the right. If your printer

is not listed, click

Have Disk

and follow the printer

manufacturer’s directions for installation.

Click

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands