Buffalo TeraStation User Manual Download Page 150

Page: 150 / 160

TeraStation User Manual

149

You can easily map the TeraStation’s shared folder as a network drive by using NAS Navigator2 included in the package.

Click

BUFFALO NAS Navigator2

icon on your Desktop.

NAS Navigator2 launches.

TeraStation’s network drive icon should be added into Computer or My Computer.You can use this network drive

just like other hard disks.

Note:

If TeraStation is not connected to the network or is off at the time your computer is booted, “The network path

could not be found. The connection was not established” is displayed.

If you want to assign a folder other than the shared folder as a network drive manually using the function built into your

OS, refer to operation system’s help file.

Appendix

Assign as Network Drive (Windows)

Right-click TeraStation’s icon and click

Map Share

The example shows the display of TS-XL Series.

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands