Buffalo TeraStation User Manual Download Page 101

Page: 101 / 160

TeraStation User Manual

100

Open Windows folder. Select

Folder Options

from the Tool menu.

Note:

Select

Control Panel

Folder Options

in Windows 2000 Server.

Note:

If "Fast User Switching" in Windows XP is enabled, the screen above will not be displayed. In such a case, open

User Accounts in the Control Panel and uncheck "Use Fast User Switching".

When the Offline File Wizard opens, follow the instructions on the screen to configure. For more information,

refer to the Windows Help File.

After configuration, your offline files and folders display as below (from Windows XP).

Click

Offline Files

tab.

Click

Enable Offline Files

Click

Right-click the icon of the shared folder on the TeraStation you have set

the offline feature for.

Click

Make Available Offline

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands