TeraStation User Manual
67
Formatting Disks
Notes:
• Formatting deletes all data from a hard drive. Be careful! Back up any important data on a drive before formatting it. It
will take a several minutes to format a hard drive.
• Shared folders cannot be accessed during formatting.
• Do not turn off the power switch or disconnect power while formatting a hard drive.
• If the power mode switch is set to auto, then the TeraStation will turn off when the format is finished.
• To erase all data on a disk, choose
System
-
Restore/Erase
instead of formatting.
1
2
3
4
The Confirm Operation screen will be displayed. Type the displayed number into the Confirmation Number field
within 60 seconds, then click
Apply
.
5
Follow the instructions displayed on the screen.
Notes:
• The time needed to format a hard drive varies based on the hard drive’s size and format types (a few seconds to
several minutes).
• The Info LED on the front of the TeraStation will flash during formatting. The TeraStation’s shared folders cannot be
accessed until the disk format is complete.
• If the hard drive is an external USB drive, its partitions will be recreated.
In Settings, navigate to
System
-
Storage
-
Disks
.
1
Select the drive to format.
2
Click
Format Disk
.
1
Select a File System.
Notes:
• If you check
Encryption
, the drive will be encrypted
with 128 bit AES. It will be normally accessible in the
TeraStation, but if removed, it will not be accessible from
other devices. If encryption is enabled, data recovery
services will not be able to recover data from a damaged
disk. To unencrypt the drive, uncheck
Encryption
and
format it again.
• Refer to page 135 for more on format type.
2
Click
Format
.