Buffalo TeraStation User Manual Download Page 42

Page: 42 / 160

TeraStation User Manual

Replication Folders

Folders that be selected as the source and destination for replication are described below.

Folders that can be selected as the replication sources:

• Shared folders on the TeraStation from which replication is configured (except for the “info” folder). This includes

USB drives.

Folders that can be selected as destinations for replication:

• Shared folders on the TeraStation where the replication job is configured (except for the “info” folder). This includes

USB drives. *1

• Shared folders on another TeraStation or LinkStation on the same network subnet (not including USB drives). *1, *2

• Shared folders of TeraStations or LinkStations whose IP addresses were entered manually at

System

Backup

View

NAS Devices

in the TeraStation’s settings. *1, *2

*1 In

Shared Folders

Shared Folder Support

, select

Disk Backup

. Subfolders within the main shared folder will not be

backed up.

*2 Shared folders with passwords configured in

Shared Folders

Remote backup password

cannot be selected as

destinations for replication.

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands