TeraStation User Manual
8
The following settings changes are recommended.
Notes:
• By default, the TeraStation will attempt to use an NTP server to set the time.
• NTP may not be usable in some network environments.
• Read the terms of use for Internet Multifeed Co. at www.jst.mfeed.ad.jp. Internet Multifeed Co. is the group
that manages the NTP Server at
www.jst.mfeed.ad.jp
. Internet Multifeed Co. is not responsible for any loss or
damages caused by this service.
• BUFFALO is not responsible for any loss or damage caused by using of this service, stopping the service, or
missing service.
• If your TeraStation fails to automatically obtain the time from NTP Server, verify the settings for the DNS server
address of the TeraStation. You must set a primary DNS server address to specify an NTP server by host name.
Otherwise you will have to specify the DNS server by IP address. You can change the DNS server settings at
Network
-
Settings
-
IP Address Settings
in Settings.
Change your administration password
We recommend that you change the default password to a secure password.
1
Click
Users/Groups
-
Local Users
in Settings.
2
Select
admin
from the user list and click
Edit User
.
3
-1
Enter a new password (twice).
-2
Click
Save
.
Your administrator password is now changed.
Configure RAID Scanning
RAID Scanning checks your RAID 1, 5 or 10 arrays for problems and automatically fixes any errors it can. To
configure:
1
Click
System
-
Storage
-
RAID Scanning
-
Modify Settings
.
2
Click
Enable
for
RAID Scanning
.
3
Select the schedule to perform RAID Scanning.
Note:
With
Immediate
checked, RAID Scanning will run immediately.
4
Click
Save
.
You have completed the settings for RAID Scanning.
12
13
Note:
Click
Use Local Date/Time
to use your computer's time (or Time Zone)
for the TeraStation's time.
1
To manually configure the date and time, click
Manual
for Date/Time
Source and adjust Date, Time, and Time Zone.
2
Click
Save
.