Buffalo TeraStation User Manual Download Page 90

Page: 90 / 160

TeraStation User Manual

Setting up a printer on Windows 2000

Refer to your printer’s manual to install the printer driver.

Double-click

My Network Places (*)

Entire Network

- (the TeraStation Server Name).

* On Windows NT 4.0 this is

Network

You have added a printer.

Click

Enable

Click

Save

Double-click the TeraStation’s printer icon (“lp”).

Click

Yes

In Settings, navigate to

Extensions

PrintServer

and click

Modify Settings

Select your printer. Choose the manufacturer on

the left and the model on the right. If your printer

is not listed, click

Have Disk

and follow the printer

manufacturer’s directions for installation.

Click

Summary of Contents for TeraStation

































































































































































Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands

Buffalo TeraStation, User Manual

Search results

Summary of Contents for TeraStation

Reviews:

Related manuals for TeraStation

Brands by name

Popular brands