TeraStation User Manual
22
1
Change system to normal mode (page 20).
2
3
4
5
Note:
After the RAID array is changed, the TeraStation will perform a RAID check that will take about 5 hours per TB.
File transfers will be slower during this period. While the “RAID ARRAY x Resyncing” message is displayed on the
LCD screen, do not turn off the TeraStation. If you turn it off, the RAID check will start over.
6
The Confirm Operation screen will appear. Enter the number shown in the Confirmation Number field within 60
seconds, and click
Apply
.
7
Follow the instructions displayed on the screen.
You have now set up a RAID 5 array. Refer to page 26 to configure a hot spare with the remaining drive. Turn to page 47
to create a shared folder.
Click the array you want to configure.
1
Select
RAID 5
.
2
Click
Create Raid Array
.
Select hard disks (3 of them) to use in RAID 5.
Using RAID 5 mode (3 hard drives)
Click
System
-
Storage
-
RAID Array
in Settings.
