Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 46 / 216

46
Kaleido-X (14RU) Expansion
KXO-EXP-R
Front Card-Edge Controls
One button is located on the front card edge of the KXO-Dual card:
KXO-EXP-R
The front panel (KXO-EXP-F) is complemented by a rear panel that provides all input and
output connectors associated with the card.
The table below describes the connectors and switch on the rear panel:
Signal Synchronization
A reference signal can be connected to either Frame A or Frame B to synchronize (genlock)
the two-frame system. For redundancy, connect both.
Button label Function
RESET Press to reboot card without removing it from frame
Connector Connector type Function
EXP LINK 1 Molex 74546-1602 Connects to EXP LINK 1 on second frame using
expansion cable (maximum length = 2 meters)
EXP LINK 2 Molex 74546-1602 Connects to EXP LINK 2 on second frame using
expansion cable (maximum length = 2 meters)
Frame A/B switch — Used to designate master/slave hierarchy:

FRAME A = master, FRAME B = slave
Expansion Link 2 Expansion Link 1 Master/Slave
switch
Bottom of panel Top of panel