Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 32 / 216

32
Installation
Card Interfaces
Controls
One button is located on the front card edge of the GPI/Genlock card:
ICAT Connector
An ICAT connector is located on the front card edge at the bottom, below the RESET button.
This connector is reserved for factory use, and has no user function.
KXI-16 Input Card Overview
The KXI-16HSV3 card is one of a series of input cards that can be installed in the Kaleido-X
system. This card is a universal input card that accepts 3Gbps, HD-SDI, SD-SDI and
composite inputs. Other cards in this series are the KXI-16HSV (3Gbps not supported), the
KXI-16HS and KXI-16HS3 (composite inputs not supported), and the KXI-16SV (HD-SDI not
supported).
For more information on the corresponding rear panel, see KXI-16 Input Rear Panel
Connections , on page 86.
KXI-16 Input Card Front-Edge Layout
The following diagram shows the various indicators, connectors and buttons that appear at
the front end of the KXI-16 input cards:
Button label Function
Reset Reset the FPGA and restart the card—for maintenance use
Status LEDs
Card
SDTI
Reset
Button
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
IN 9
IN 10
IN 11
IN 12
IN 13
IN 14
IN 15
IN 16