Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 38 / 216

38
Installation
Ventilation
Frame Cooling Fans
Primary ventilation for the cards installed in the frame is handled by six fans located at the
top rear of the frame, behind the power supplies.
These fans draw air into the frame through a grille and filter in the front door, and exhaust it
through the grate on the rear of the fan assembly.
Power Supply Cooling Fans
Each power supply has two (KXA-PSU-7) or three (KXA-PSU-7-B) fans located on the front of
the supply (behind the extraction handle, in the case of the KXA-PSU-7 power supply).
KXA-PSU-7 power supply
KXA-PSU-7-B power supply
Card Cooling Fans
Some of the cards in the Kaleido-X system are equipped with on-board fans to ensure
proper cooling of key components. These fans focus the air flow provided by the frame
cooling fans.
Air Filter
Cooling air drawn into the Kaleido-X frame by the ventilating fans passes through a filter
located behind a grille in the front door of the frame. To clean the air filter, see
Cleaning the
Air Filter , on page 166.
IMPORTANT
The Kaleido-X requires a constant flow of cooling air during operation.
DO NOT OPERATE THE UNIT IF THE FRAME COOLING FANS ARE NOT
WORKING.
To replace a defective fan, see Replacing Frame Ventilation Fans , on
page 165.
Card On-board fans
Output (KXO) card 4
Router card 2
Input (KXI-16) card 4
GPI/genlock card 0