Belden Grass Valley Kaleido-X, Installation & Service Manual, Page: 98 / 216

98
IP Network Setup
TCP/UDP Port Usage
Between multiviewer and SNMP managers
Between multiviewer and NTP server
The following ports, used for communications to/from Network Time Protocol servers, are
open by default on all Kaleido Multiviewer systems:
Driver Port Transport Notes
ETL 4000 TCP
GVG 7000 Native 12345 TCP
NVEP NV9000 (NP0017) 9193 TCP
VikinX Modular 4381 TCP
Quintech 9100 TCP
Sony HKSPC 12345 TCP GVGNP Emulator
Utah RCP-3 5001 TCP SC-4 Ethernet
SAM (Snell/Pro-Bel) SW-P-02 2000 TCP
SAM (Snell/Pro-Bel) SW-P-08 14000 TCP
Note:
This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.
Port Used for Transport Notes
161 SNMP UDP Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
multiviewer (for example, sending get, get-next, and set
messages to a multiviewer’s SNMP agent, and receiving the
response).
1161 UDP Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
Kaleido-IP multiviewer (for example, sending get, get-next,
and set messages to a multiviewer’s SNMP agent, and
receiving the response).
Port Used for Transport Notes
123 NTP TCP Used for Network Time Protocol synchronization. Port
needs to be open in both directions.