Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 71 / 216

71
Kaleido-X (7RU)
Installation & Service Manual
creating holes in the router matrix. This is because the sources of one frame do not
have access to the internal router of the other frame. The signals do not pass via the
frame expansion cable. To be able to route any source to any internal router destination
in the KX Router logical router, the router cards must be connected by their own router
expansion cables (IN to OUT between cards in the same slot in each frame).
The cabling connections must then be described in XEdit.
5 Click the Interconnects tab, and then click the expansion frame icon.
6 In the Properties tab, notice that there are four entries (two per frame) for the router
cards (OPTION A and B) with rows labeled Expansion input and Expansion output .
Normally, you connect the router cards in matching slots (for example, FRAME A –
OPTION A to FRAME B – OPTION A).
Router