Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 197 / 216

197
Kaleido-X
Hardware Description & Installation Manual
Cascade Upgrade
Update the multiviewers that are part of a Kaleido-IP/Kaleido-X cascade in sequence,
starting with the multiviewer farthest from the monitor wall (i.e. the Kaleido-IP), and
finishing with the one connected to the monitor wall displays (i.e. the Kaleido-X). When you
restart one multiviewer at the end of its update process, you can start updating the other
without waiting for the restart to be completed.
To upgrade a Kaleido-IP/Kaleido-X cascade system
1 Load an empty layout on the monitor wall, or make sure that the bottom area of the
current layout is empty.
2 From a workstation on the same subnet, open a Web browser window and type the
Kaleido-IP’s management IP address in the address bar.
The Kaleido-IP home page appears.
Firefox users:
If you see a security warning instead of the home page, then see Registering
your Multiviewer's Security Credentials with your Browser on page 116.