33
Kaleido-X (7RU)
Installation & Service Manual
LED Indicators
The following LED status indicators are visible on the front edge of the input cards (listed
from top to bottom):
Controls
One button is located on the front card edge:
ICAT Connector
An ICAT connector is located on the front card edge at the bottom below the RESET button.
This connector is reserved for factory use, and has no user function.
KXO-24Router Card
The following diagram shows the various indicators, connectors and buttons that appear at
the front end of the KXO-24Router cards:
LED label
LED color
Interpretation
Card Status
Green
Red
Orange
Flashing Red
Card OK
Error
Programming in progress
Upgrade in progress
SDTI Status
Green
Red
Valid signal present
No signal or invalid signal
IN 1 Status to
IN 16 Status
Green
Red
Valid signal present
No signal or invalid signal
Button label
Function
Reset
Reset the FPGA and restart the card (for maintenance use)
Summary of Contents for Grass Valley Kaleido-X
