Belden Grass Valley Kaleido-X Installation & Service Manual Download Page 173

Page: 173 / 216

173

Kaleido-X (7RU)

Installation & Service Manual

3 Locate and open the Kaleido Software Upgrade Manager application (XUpdate).

4 On the startup screen, click the appropriate update option for your multiviewer model:

Kaleido-X

5 When prompted to select a type of update, click

Smart update (recommended)

6 If the

Select USB Drive

window appears, click the letter corresponding to the USB key

you inserted in step 2, and then click

Select

Note:

If you click

Total update (no prompt)

, then the update process, once

initiated, cannot be halted. This option should only be used to recover from
a failed upgrade.

Summary of Contents for Grass Valley Kaleido-X

























































































































































































































Search results

Summary of Contents for Grass Valley Kaleido-X

Reviews:

Belden Grass Valley Kaleido-X, Installation & Service Manual, Page: 173 / 216

Search results

Summary of Contents for Grass Valley Kaleido-X

Reviews: