Belden Grass Valley Kaleido-X, Installation & Service Manual

Page: 212 / 216

212
Specifications
Optional Drivers for Controlling Tally Interface Devices from the Multiviewer
Optional Drivers for Controlling Tally Interface Devices from the
Multiviewer
Optional drivers are available to extend your Kaleido-X system with the ability to control
tally interface devices such as the ones listed in the tables below. Contact your sales
representative for more information.
PESA USP (Unsolicited Status
Protocol) No Cheetah, Tiger, Jaguar,
Cougar, Ocelot, Bobcat,
TDM3000, PERC2000 system
controller
CPU Link Protocol No.1
(serial) No
Quintech XRM/SRM/MRF/MRM Series
Protocol (serial) No SRM 2150 Matrix Switching
Systems
SAM (Snell/Pro-Bel) General Switcher Protocol
(SW-P-02)
No
General Remote Protocol
(SW-P-08) Yes Halo, Aurora and Sirius
Controller (serial control)
Sony Sony HKSPC (GVGNP
Emulator) No Sony routers (requires HKSPC
card); GVG routers (Ethernet)
Utah Scientific PL-160/PL-320 No AVS-1B
RCP-1 No SC-1, SC-2, SC-3 series
RCP-3 Yes SC-4 series (Ethernet only)
1.Deprecated. To be used with legacy configurations only.
2.To be used in most cases. Supports native locks, and aliases from router (provided system controller
has NV9000 router control system version 6.0.6 or later)
3.To be used in very specific scenarios involving physical router interconnects with tie lines, or with
hybrid router configurations. Contact Technical Support for more information (see Grass Valley
Technical Support , on page 216).
4.For Thomson / Grass Valley Series 7000 devices, our current implementation of the Series 7000
Native Protocol supports serial devices, in addition to some Encore system controller models, which
are also supported over Ethernet. For other Series 7000 devices you wish to control via Ethernet, use
Sony HKSPC (GVGNP Emulator).
5.Our current implementations of the protocols listed above for Grass Valley (Thomson/Philips)
routers and controllers support neither the CM-4400 nor the CM-4000 system controllers.
6.In the case of the Kaleido-X, and Kaleido-X16 multiviewers, the ES-Switch protocol is only supported
with a baud rate of 19200.
Company Protocol
Text
database
download Routers/Controllers
Production Switchers
Company Device/System
Grass Valley (Thomson) Kayenne K-Frame, Karrera K-Frame, Zodiak, XtenDD HD/SD series