Operator’s Manual 4-15
110017276EN Rev. B
4 Detailed Reference
WARNING:
Wear eye protection when installing or removing lamps.
WARNING:
Do not touch the glass lamp or the circuit board. Hold the assembly only by the outer metal
housing.
WARNING:
Do not drop, scratch, or apply force to lamp, as the high pressure inside may cause the lamp
to rupture.
Note:
The
Stellaris® PC
Vision Enhancement System will not work unless both lamps are fitted
in place. If you remove a lamp you must replace it with another lamp or the system will not
function.
1.
TURN OFF THE SYSTEM. Wait 20 minutes for the system to cool before attempting lamp
replacement.
2.
Open the lamp-replacement access door on the side of the unit by placing a coin or flat head screwdriver
into the slot and turning it clockwise. The dot should be on the right, and the door should then lift off.
Figure 4.9. System side with lamp access door open.
3.
Identify the lamp that requires replacement: lower lamp = Lamp #1; upper lamp = Lamp #2.
4.
Undo the two lamp fasteners by turning the two thumbscrews counter-clockwise.
Summary of Contents for STELLARIS PC
