manualshive.com logo in svg

Bausch & Lomb STELLARIS PC, Operator'S Manual

Share
Download
Bausch & Lomb STELLARIS PC Operator'S Manual Download Page 285

Operator’s Manual     7-1 

110017276EN Rev. B

7 Service and Warranty

    Service and Warranty 

 This chapter contains instruction on how to contact  Lomb to obtain service on your  

Stellaris® PC

  

 Vision Enhancement System , as well as warranty and environmental information. 

 

Note:  

 

     Preventive scheduled maintenance is recommended once a year to insure that the  

Stellaris® PC

  

 Vision Enhancement System  meets its optimum performance, reliability and safety standards set 
by the manufacturer. The maintenance shall be done by a  Lomb certified individual 
only.

 

Note:  

 

     Other than main fuses and lamps, this system contains no parts that are serviceable by the user.  
All maintenance shall be done by a  Lomb certified individual only. . 

7.1.  

 Service Information 

       Technical  Assistance 

 Assistance for  

Stellaris® PC

   Vision Enhancement System  is available from Global Product Support as follows: 

 Bausch & Lomb  Incorporated
3365 Tree Court Industrial Blvd.
St. Louis, Missouri 63122 U.S.A.
Attention: Global Product Support Department 

 http://www.bausch.com/en_US/ecp/age/surg_prod_support.aspx 

•    For product support  

within the U.S.A.

  call the 24-hour telephone line 1-800-338-2020 or fax 

636-226-3070. 

•   For product support from  

outside the U.S.A.

  either call 1-636-226-3535, send a fax to 

1-636-226-3070, or contact your local  Lomb Product Support Representative (listing of local 
offices starts on  page 7-2 ). 

  Please organize your material before calling or writing for technical support. Please have the following 
information ready: 

• 

  Customer  account  number 

•   Name of function, handpiece, etc. that needs service 

•   Model number (REF #) and serial number (SN#) of  

Stellaris® PC

    Vision  Enhancement  System , 

located on the label on the back panel 

•   Date of purchase 

Summary of Contents for STELLARIS PC

































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands