6-8 Operator’s Manual
110017276EN Rev. B
6 Troubleshooting
ID Type
Text Message
Suggested Action(s)
LM18
Warning
The upper illuminator has a bulb ballast
error and cannot be used. It will be
turned off in 30 seconds.
SG01 Call your product service
representative.
LM19
Warning
The lower illuminator has a bulb ballast
error and cannot be used. It will be
turned off in 30 seconds.
SG01 Call your product service
representative.
LM20
Warning
The upper illuminator bulb voltage is
high.
SG94 Replace the upper illuminator bulb.
LM21
Warning
The lower illuminator bulb voltage is
high.
SG95 Replace the lower illuminator bulb.
LM23
Warning
The illuminator ballast fan has failed.
The illuminators will be turned off in
30 seconds.
SG04 Call your product service
representative if this problem persists.
LM24
Warning
The upper illuminator bulb is at end of
life. Lamp will be disabled if turned off.
SG94 Replace the upper illuminator bulb.
LM25
Warning
The lower illuminator bulb is at end of
life. Lamp will be disabled if turned off.
SG95 Replace the lower illuminator bulb.
LM26
Warning
The illuminator temperature is too high.
The illuminators may be turned off
within 2.5 minutes.
SG04 Call your product service
representative if this problem persists.
LM27
Info
Note that the level of light output being
requested should be used with awareness
of exposure time and proximity to the
retina.
Limiting exposure to less than a
guidelines value of 10 J/cm2 helps
maintain retinal tissue. At the requested
setting, this does level may be exceeded
in less than 30 minutes with the Bausch
+ Lomb focal light probe positioned 15
mm from the retina.
The time to reach the exposure guidelines
will vary with:
1) Filter selection - Value reached within 30
minutes with the following settings:
a) White - 60%
b) Green - 68%
c) Yellow - 88%
d) Amber - 100%
2) Distance from the retina
3) Light dispersing probes
Summary of Contents for STELLARIS PC
