Bausch & Lomb STELLARIS PC, Operator'S Manual

Page: 168 / 352

3-14 Operator’s Manual 110017276EN Rev. B
3 Customizing Your System
3.3. Manage Surgeon Files
Create a New Settings File
To create a new surgeon preference file, select the Create Tab from the Manage Settings Screen , then select
the existing surgeon file which has settings most similar to the file you are going to create. Once you have
highlighted a file, the techniques in that file will be listed on the right side of the screen. Select one or more
techniques by touching them. Select a technique a second time to deselect it.
Figure 3.11. Create New Settings File Screen .
Once all the desired techniques are highlighted, select Confirm and a keyboard will appear, through which you
can enter the name for the new surgeon file, then select Enter . The name of the new file will appear on the left
side of the screen, and a new set of tabs ( Profile , Technique , Foot Control , and Fluidics ) will appear across the
top of the screen. These can be used to further customize the preference file (see page 3-6 ).