manualshive.com logo in svg

Bausch & Lomb STELLARIS PC, Operator'S Manual

Share
Download
Bausch & Lomb STELLARIS PC Operator'S Manual Download Page 44

1-34     Operator’s Manual

110017276EN Rev. B

1 Getting Started

 For systems left idle more than seven days, the Foot Control must be charged for six hours before use to ensure 
proper operation. 

 CAUTION: 

     To prevent loss of data, save data before the system shuts down. 

 

Figure  1.21.      Stellaris  PC  System  Rear  View. 

  1. USB Port Access.   2. IV Pole Control Buttons.   3. Cord Wrap Hooks.   4. Foot Control Hook. 

  5. Air Pressure Output connector.   

 The front of the system (see  Figure 1.22  on  page 1-35 ) contains multiple ports for connecting system accessories. 
There are five ports down the left side of the system, of which only the second and third are active. The second 
port is for ultrasound handpieces (phacoemulsification and fragmentation) and the third port is for coagulation 
(see  page 1-35 ). The remainder are reserved for future use. 

 The single port at the top of the cassette housing provides air pressure to drive the pneumatic vitrectomy cutter. 

Summary of Contents for STELLARIS PC

































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands