manualshive.com logo in svg

Bausch & Lomb STELLARIS PC, Operator'S Manual

Share
Download
Bausch & Lomb STELLARIS PC Operator'S Manual Download Page 203

Operator’s Manual     4-13 

110017276EN Rev. B

4 Detailed Reference

 

Figure 4.8.  Illumination control showing a green ring around the On/Off button, 

which indicates the lower illumination port (right) is turned on. 

The filter button is below the on/off button for the lower (right) lamp.  

3. 

 Use the on screen control to adjust the intensity. 

 

Note:  

 

     Lamp may take several minutes to complete the warm up, but can be used once a required 
intensity has been reached. 

 

Note:  

 

     Never turn the illumination on and off rapidly. 

4. 

 Set the illumination output with the up/down buttons in the display tube. Click on the arrow to increase 
or decrease the output level, or click and hold to make larger changes. 

  

Note:  

 

     Should the light source fail during use, the operator must switch the fiber optic illuminator to 
the other lamp port. The burned-out lamp should be replaced before the next surgery. 

   Illumination  Filter  Control 

 The lower lamp has 3 optional filters that can be used. 

 You can change the current filter using the touch screen display and foot control (if programmed appropriately), 
or use the filter button on the surgical screen to toggle filter selection (none, amber, green, yellow). You can also 
select the filter from the More Settings screen. 

Summary of Contents for STELLARIS PC

































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands