Bausch & Lomb STELLARIS PC, Operator'S Manual

Page: 28 / 352

1-18 Operator’s Manual 110017276EN Rev. B
1 Getting Started
3. Connect the proper accessories to the system for an Anterior, Posterior,
or Combined procedure.
Note: If you are using a vented Air Forced Infusion (AFI) pack, make sure to connect the
Fluid/Air Exchange filter to the F/AX port on the front of the machine.
Detailed setup instructions for each configuration are provided in Chapter 4 . Use the following list to navigate to
the appropriate page and surgical setup instructions for the desired configuration.
Posterior Domain -
• Vitrectomy - See page 4-7
• Illumination - See page 4-12
• Fluid/Air Exchange - See page 4-19
• Viscous Fluid Injection - See page 4-24
• Viscous Fluid Aspiration - See page 4-25
• Linear Fluid Injection, Linear Vacuum - See page 4-27
• Fragmentation - See page 4-28
Anterior Domain -
• Irrigation/Aspiration - See page 4-31
• Phacoemulsification - See page 4-37
• Planned Anterior Vitrectomy - See page 4-40
• Unplanned Anterior Vitrectomy - See page 4-41
Coagulation -
• Fixed Coagulation - See page 4-47
• Linear Coagulation - See page 4-48
Combined Domain - See page 4-50
Note: Fragmentation uses the same power connection as the ultrasound handpiece. Only
one function can be used at a time.
Note: If a linear coagulation in set up is enabled or a Foot Control button is programmed
for coagulation, begin by plugging in the coagulation cord.
For on-screen instructions, select
Show Me Steps
from the
Prime and Tune
Screen and a tabbed screen will
appear, detailing the required steps and showing animations of how to perform each step.