Bausch & Lomb STELLARIS PC, Operator'S Manual

Page: 118 / 352

2-40 Operator’s Manual 110017276EN Rev. B
2 User Interface
Ultrasound, Coagulation or Viscous Fluid Control (VFC)
The lower right corner displays either the Ultrasound or VFC status, depending on which mode is currently
selected from the clock menu. The current setting is shown on the top of the test tube, with a green background
for ultrasound, and an aqua background for VFC. The actual value is displayed in the middle of the test tube.
When ultrasound is active, an option list control appears in the lower right corner, and selecting the small
allows you to select from a list of pre-programmed ultrasound submodes. If you select pulsed ultrasound, the
pulse per second (PPS) and duty cycle (DC) spin controls appear if the display option button is selected.
Footpedal and Coagulation
The current footpedal status is displayed in the bottom center of the screen. The current pitch region (1, 2, or
3) is shown, and the circles around the top indicate yaw position. See the chart on page 1-59 for details on Foot
Control setup.
If one of the Foot Control Buttons has been programmed to control coagulation, a Coagulation control
will appear just to the left of the Foot Control display, showing the current maximum power setting for the
coagulation function.
When Linear Coagulation Mode is selected from the clock menu, the same area of the screen will display linear
coagulation settings.
2.4. Customizing Your System Settings
The
Stellaris® PC
Vision Enhancement System has a programming interface, through which you can program
the system for your own preferred operating configuration and instrument parameters. For details on how to
program your system, see Chapter 3 .