Operator’s Manual 6-21
110017276EN Rev. B
6 Troubleshooting
Symptom
Action Required
GUI hung up and
system ceased
operation
When the problem occurs, the system will automatically turn ON the irrigation valve
to provide continuous irrigation. System and MMC need to be restarted to resume
operation.
To restart system, perform the following:
A. Power down system by pressing and holding the standby power switch in front of
the system.
B. Wait until the system powers down completely.
C. Power down MMC by pressing and holding the power switch until the light turns
brighter (if not already powered down).
D. Restart MMC by pressing the power switch.
E. Restart system by pressing the standby power switch once.
F. Repeat system set up sequence,
Prime and Tune
system to resume operation.
6.5.
System Configurations, Modules, Accessories and
Packs
Use of non-approved accessories, packs or parts may affect system performance. The unauthorized modification
or alteration of the equipment, or the use of non-approved accessories, packs or parts with the equipment shall
relieve Lomb from any warranty, service obligation or other liability for damages to, or failure of, the
equipment caused by such unauthorized acts.
For additional information, please contact a Lomb sales representative or your local sales office.
The system configurations, modules, accessories and packs provided on the following pages are to be used
with the
Stellaris® PC
Vision Enhancement System . Although not provided in the list; the ultrasound needles,
I/A handpiece, I/A tips, and bipolar accessories for the
Millennium
Microsurgical System and Stellaris® are
compatible and could be used with the
Stellaris® PC
Vision Enhancement System .
Available Accessories and Packs
The packs listed below can be used with the
Stellaris® PC
Vision Enhancement System . A complete list of
accessories, including approved needles and sleeves and packs is available from your sales representative upon
request.
Summary of Contents for STELLARIS PC
