1-4 Operator’s Manual
110017276EN Rev. B
1 Getting Started
Foot Control
The Foot Control can use either wired or wireless communication. The first time the
Stellaris® PC
Vision
Enhancement System is used, you must use the wired connection to establish communication between the Foot
Control and the
Stellaris® PC
Vision Enhancement System .
For wired communication, connect the Foot Control backup cable from the back of the Foot Control to the
lower rear of the
Stellaris® PC
Vision Enhancement System .
Ethernet Cable (optional)
The Ethernet cable connection only applies to a
Stellaris® PC
Vision Enhancement System with
TruLink
®
Customer Support Network enabled, when you intend to upload system information to the Lomb
Global Service Support server. No Ethernet cable is supplied with the system.
If you plan to use the
TruLink
® Customer Support Network, connect an Ethernet cable from the back of the
Stellaris® PC
Vision Enhancement System to the wall network port before powering up the system, and
disconnect it after the system is powered down.
When the Ethernet cable is not in use, install the attached protective cap into the open socket.
Compressed Air Connection
Connect the external air hose to the rear of the system as shown, and then to an appropriate air source.
Summary of Contents for STELLARIS PC
