Bausch & Lomb STELLARIS PC, Operator'S Manual

Page: 188 / 352

3-34 Operator’s Manual 110017276EN Rev. B
3 Customizing Your System
Parameter Options/Ranges/Step Sizes
Burst interval for fixed pulse
modes 2 ms to 20 ms by 2 ms
20 ms to 80 ms by 5 ms
80 ms to 600 ms by 20 ms Phase/Case
Maximum duty cycle for
multiple burst modes 50% to 99% by 5%
Subject to a minimum off time of 2 msec and a maximum
off time of 1500 msec Phase/Case
Waveform Ultrasound Disabled, Enabled Phase/Case
Linear control power
minimum level 0% to 10% by 1%
10% to 30% by 2%
30% to 100% by 5% Phase/Case
Minimum duty cycle for
multiple burst modes 1% to 10% by 1%
10% to 30% by 2%
30% to 50% by 5%
Subject to a minimum off time of 2 msec and a maximum
off time of 1500 msec Phase/Case
Foot control mapping (for
linear control) - front loaded,
linear, back loaded Linear, Front Loaded, Back Loaded Phase/Case
Waveform Type Ramped (not programmable) Phase/Case
Waveform duration 250 ms to 1000 ms by 50 ms
(resolution of 50 ms even with calculator) Phase/Case
Waveform Depth 25% to 100% by 5% Phase/Case
Pulsed mode linear pulse rate
minimum 1 PPS to 20 PPS by 1 PPS
20 PPS to 50 PPS by 5 PPS
50 PPS to 250 PPS by 10 PPS
Subject to minimum on time of 2 ms and a minimum off
time of 2 ms Phase/Case
Pulsed mode linear duty
cycle minimum 5% to 95% by 5%
Subject to minimum on time of 2 ms and a minimum off
time of 2 ms Phase/Case
Burst mode linear duration
minimum 2 ms to 20 ms by 2 ms
20 ms to 80 ms by 5 ms
80 ms to 600 ms by 20 ms Phase/Case
Foot control mapping (for
second ultrasound linear
control) Linear, Front Loaded, Back Loaded, Reverse Linear,
Reverse Front Loaded, Reverse Back Loaded Phase/Case