Bausch & Lomb STELLARIS PC, Operator'S Manual

Page: 106 / 352

2-28 Operator’s Manual 110017276EN Rev. B
2 User Interface
A/V More Settings Screen Tab
The
A/V More Settings Screen
tab has three buttons that allow you to change many aspects of the audio and visual
displays. Each button allows you to change the settings and configuration for aspects of the display.
The Audio button allows you to control the master volume for the system, as well as the specific tone and
volume used for each of the following events: Irrigation, Vacuum, Occlusion, Ultrasound, Coagulation,
Vitrectomy, and Alert. The selected tone will be played when that function is active, and the frequency of the
tone will change with the value of the function.
Figure 2.31. A/V More Settings Screen tab, Audio button.
Select the tone you want to change, then use the menu and arrows on the right side of the screen to select the
tone used for that condition, and the volume at which the tone will be played. Only tones not currently in use for
another condition will be available for selection.
Voice Confirmation can also be enabled or disabled through this tab.