Bausch & Lomb STELLARIS PC Page 243 Operator'S Manual Download

Page: 243 / 352

Operator’s Manual 4-53

110017276EN Rev. B

4 Detailed Reference

Figure 4.33. Connecting tubing to the phaco handpiece.

1. Phaco Handpiece. 2. Phaco Needle. 3. Infusion sleeve. 4. Test Chamber. 5. Connect to U/S connector.

6. Connect to Vit actuation port. 7. Connect to air pressure port.

12. Plug the handpiece connector to the machine (Second connector from the top).

13. Thread and firmly secure the ultrasound needle onto the ultrasound handpiece using a needle wrench.

14. Thread the irrigation sleeve over the ultrasound needle so that the holes in the irrigation sleeve are

placed approximately 1 mm from and perpendicular to the bevel of the ultrasound needle (increase to
approximately 1.5 mm for denser cataracts)

15. Toggle the

Irrigation Off

button to turn flow on, and allow the flow to fill the irrigation tubing up to the

handpieces. See page 2-39 for details on the irrigation flow button (activate the Fill button with turn flow on
for 20 seconds).

16. Fill the test chamber with irrigating solution, then slide over the tip of the handpiece.

17. Select Prime and Tune. A vacuum test is part of the priming cycle.

After successful priming and tuning, the Main Surgical Screen will appear.

Summary of Contents for STELLARIS PC

































































































































































































































































































































































Search results

Summary of Contents for STELLARIS PC

Reviews:

Related manuals for STELLARIS PC

Brands by name

Popular brands

Bausch & Lomb STELLARIS PC, Operator'S Manual

Search results

Summary of Contents for STELLARIS PC

Reviews:

Related manuals for STELLARIS PC

Brands by name

Popular brands