manualshive.com logo in svg

Bausch & Lomb STELLARIS PC, Operator'S Manual

Share
Download
Bausch & Lomb STELLARIS PC Operator'S Manual Download Page 192

4-2     Operator’s Manual

110017276EN Rev. B

4 Detailed Reference

 WARNING: 

     Ensure the maximum capacity of the cassette is not exceeded as this could cause a hazardous 
situation to the patient. 

 WARNING: 

     Never intentionally modify handpieces or tips, such as do not bend, cut or engrave, as they 
could break or malfunction. 

 

Note:  

 

      

Stellaris® PC

   Vision Enhancement System  is designed with cassette identification feature. Use 

only cassette type that is similar to the selected software domain. System error messages will be 
displayed when wrong cassette type is inserted. 

   Emptying Cassette 

 WARNING: 

     Improper reassembly of tubing manifold to the cassette may result in inadequate system 
performance. 

 The   

Stellaris® PC

   Vision Enhancement System ’s cassette can be emptied during operation by using following 

instructions: 

1. 

  Stop the operation and remove all handpieces from the eye. 

2. 

 Close both irrigation clamps (the clamp near the bottle and the clamp at the 2-way stopcock). 

3.  

Select 

 

Eject Cassette

  from the surgical screen. 

4. 

 Remove the cassette from the system. 

Summary of Contents for STELLARIS PC

































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands