Autodesk AUTOCAD 2006 Command Reference Manual Download Page 953

Page: 953 / 1490

Publish Block Template Dialog Box (Publish)

File menu: Publish

Command line:

publish

Specifies which blocks and their properties and attributes to include in the
published DWF file.

Current Template

Displays the name of the current block template.

Block Source Drawings

Displays all block source drawings that have been loaded into the Publish
Block Template dialog box.

Add

Adds drawings to the list of block source drawings.

Remove

Removes selected drawings from the list of block source drawings.

Scan for Blocks

Scans block source drawings for unique definitions of blocks and their
properties and attributes.

Block Data to Publish

Displays block data to publish.

Check Blocks to Publish

Displays all scanned blocks found in block source drawings.

Check Properties to Publish

Displays the union of properties of the current selection of blocks.

Exclude Blocks Without Attributes

Excludes blocks without attributes defined.

Exclude General Block Properties

Excludes all general block properties from the list display.

Publish Block Template Dialog Box (Publish) | 929

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AUTOCAD 2006

Reviews:

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 953 / 1490

Search results

Summary of Contents for AUTOCAD 2006

Reviews: