Autodesk AUTOCAD 2006, Command Reference Manual, Page: 700 / 1490

The corner joint is completed, and the following prompt is displayed:
Select first mline (or Undo): Select another multiline or enter u
Add Vertex
Adds a vertex to a multiline.
Select mline: Select a multiline
A vertex is added at the selected point, and the following prompt is displayed:
Select mline or [Undo]: Select another multiline or enter u
Delete Vertex
Deletes a vertex from a multiline.
Select mline: Select a multiline
The vertex nearest to the selected point is deleted, and the following prompt
is displayed:
Select mline or [Undo]: Select another multiline or enter u
Cut Single
Creates a visual break in a selected element of a multiline.
Select mline: Select a multiline
The selection point on the multiline is used as the first cut point, and the
following prompt is displayed:
Select second point: Specify the second cut point on the multiline
The element is cut, and the following prompt is displayed:
Select mline or [Undo]: Select another multiline or enter u
Cut All
Creates a visual break through the entire multiline.
676 | Chapter 14