manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 597 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 597

Maximize Column

Changes the width of the column to maximize display of the column
content. This option is available on the shortcut menu that is displayed
when you right-click a column heading.

Maximize All Columns

Changes the width of all columns to maximize display of the column
content. This option is available on the shortcut menu that is displayed
when you right-click a column heading.

Show Filter Tree

Displays the tree view. Clear this option to hide the tree view.

Show Filters in Layer List

Displays filters at the top of the list view. The filters are listed in alphabetical
order. Clear the check mark to display only layers in the list view.

Set Current

Sets the selected layer as the current layer. (CLAYER system variable)

New Layer

Creates a new layer. The list displays a layer named LAYER1. You can edit
this layer name immediately. The new layer inherits the properties of the
currently selected layer in the layer list (color, on or off state, and so on).

Delete Layer

Deletes selected layers from the drawing file definition. You can delete only
unreferenced layers. Referenced layers include layers 0 and DEFPOINTS,
layers containing objects (including objects in block definitions), the current
layer, and xref-dependent layers.

NOTE

Be careful about deleting layers if you are working on a drawing in a

shared project or one based on a set of layering standards.

Change Description

Adds a description or changes the text in the description for the selected
layer or filter. The description for a filter is added to the filter and to all
layers in the filter.

Remove from Group Filter

Removes the selected layers from the group layer filter that is selected in
the tree view.

Layer Properties Manager | 573

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments