manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1316 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 1316

Length

Creates a wedge with specified length, width, and height values. The length
corresponds to the X axis, the width to the Y axis, and the height to the Z
axis.

Specify length:
Specify width:
Specify height:

width

length

height

Entering a positive value draws the length, width, and height along the
positive X, Y, and Z axes of the current UCS. Entering a negative value draws
them along the negative axes.

Center

Creates the wedge by a specified center point.

Specify center of wedge <0,0,0>: Specify a point (1) or press   ENTER
Specify opposite corner or [Cube/Length]:  Specify a point (2) or enter an option

1

Corner

Specifies the corner of the wedge.

Specify height:

Entering a positive value draws the height along the positive Z axis of the
current UCS. Entering a negative value draws the height along the negative
axis.

1292 | Chapter 24   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments