manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 348 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 348

The current dimension style determines the appearance of the generated
measurements.

Text

Customizes the dimension text at the command line. The generated dimension
measurement is displayed within angle brackets.

Enter dimension text <current>:

Enter the dimension text, or press ENTER to accept the generated measurement.
To include the generated measurement, use angle brackets (< >) to represent
the generated measurement. If alternate units are not turned on in the
dimension style, you can display alternate units by entering square brackets
([ ]).

Dimension text properties are set on the Text tab of the New, Modify, and
Override Dimension Style dialog boxes.

Angle

Changes the angle of the dimension text.

Specify angle of dimension text:

Enter an angle. For example, to rotate the text 45 degrees, enter 

45

.

Partial

Reduces the length of the arc length dimension.

Specify first point for arc length dimension:

Specify a point on the arc where the arc length dimension should begin.

Specify second point for arc length dimension:

Specify a point on the arc where the arc length dimension should end.

Leader

Adds a leader object. This option is displayed only if the arc (or arc segment)
is greater than 90 degrees. The leader is drawn radially, pointing towards the
center of the arc being dimensioned.

Specify arc length dimension location or [Mtext/Text/Angle/Partial/No leader]:

Specify a point or enter an option. The leader is created automatically. The
No Leader option cancels the Leader option before the leader is created. To
remove a leader, delete the arc length dimension and recreate it without the
leader option.

324 | Chapter 6   

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments