Autodesk AUTOCAD 2006, Command Reference Manual, Page: 1176 / 1490

Insertion Base Is
Displays the insertion point of the drawing, stored in the INSBASE system
variable and expressed as an X,Y,Z coordinate.
Model or Paper Space Limits Are
Displays the grid limits defined by LIMITS. The first line shows the XY
coordinate of the limit’s lower-left corner, stored in the LIMMIN system
variable. The second line shows the XY coordinate of the limit’s upper-right
corner, stored in the LIMMAX system variable. The notation Off to the right
of the Y coordinate value indicates that limits checking is set to 0.
Model or Paper Space Uses
Displays the drawing extents, which includes all objects in the database
and can exceed the grid limits. The first line shows the XY coordinate of
the lower-left corner of the extents. The second line shows the XY coordinate
of the upper-right corner. The notation Over to the right of the Y coordinate
value indicates that the drawing extends outside the grid limits.
Object Snap Modes
Lists the running object snap modes specified by OSNAP.
Snap Resolution Is
Displays the snap spacing in the X and Y directions, stored in the SNAPUNIT
system variable.
Thickness
Lists the current thickness, stored in the THICKNESS system variable.
STLOUT
Stores a solid in an ASCII or binary file
Command line: stlout
Select a single solid for STL output...
Select objects: Use an object selection method and press ENTER when you finish
Create a binary STL file? [Yes/No] <Yes>: Enter y or press ENTER to create a
binary file, or enter n create an ASCII file
The Create STL File dialog box (a Standard File Selection Dialog Boxes) is
displayed.
1152 | Chapter 20