Autodesk AUTOCAD 2006, Command Reference Manual, Page: 682 / 1490

Corner
Sets the scale factor by using the block insertion point and the opposite
corner.
Specify opposite corner: Specify a point
Specify rotation angle <0>:
The rotation angle sets the angle of the individual block inserts and also
sets the angle of the entire array.
Enter number of rows (---) <1>: Enter a positive value
Enter number of columns (| | |) <1>: Enter a positive value
If you specify more than one row, the following prompt is displayed:
Enter distance between rows or specify unit cell (---): Enter a value, or specify
two points to define a box whose width and height represent the distance between
rows and between columns
If you specify more than one column and no unit cell, the following prompt
is displayed:
Specify distance between columns ( | | | ): Enter a value or specify a distance
XYZ
Sets X, Y, and Z scale factors.
Specify X scale factor or [Corner] <1>: Enter a value or press ENTER to use the
same scale factor
If you enter c , you specify a corner point. The specified point and the block
insertion point determine the X and Y scale factors.
Specify Y scale factor or <use X scale factor>: Enter a value or press ENTER to
use the same scale factor
Enter Z scale factor <use X scale factor>: Enter a value or press ENTER to use
the same scale factor
Specify rotation angle <0>:
The rotation angle sets the angle of the individual block inserts and also
sets the angle of the entire array.
Enter number of rows (---) <1>: Enter a positive value
Enter number of columns (| | |) <1>: Enter a positive value
If you specify more than one row, the following prompt is displayed:
Enter distance between rows or specify unit cell (---): Enter a value, or specify
two points to define a box whose width and height represent the distance between
rows and between columns
If you specify more than one column and no unit cell, the following prompt
is displayed:
Specify distance between columns ( | | | ): Enter a value or specify a distance
658 | Chapter 14