Autodesk AUTOCAD 2006, Command Reference Manual, Page: 52 / 1490

Using geometry acceleration makes more efficient use of the graphics card.
With this option turned on, you are drawing in single precision. Use this
option only if you know that your drawing is within the single-precision
limit.
Anti-alias Lines
Specifies using anti-aliasing lines. Lines appear smoother and less gradient.
Exit
Exits the 3DCONFIG command.
3DCORBIT
Starts the interactive 3D view and enables you to set the objects in the 3D view into
continuous motion
3D Orbit toolbar:
Shortcut menu: Start the 3DORBIT command, right-click in the drawing area,
and choose More
➤
Continuous Orbit.
Command line: 3dcorbit
3DCORBIT changes the cursor to a sphere with two continuous lines encircling
it. Click in the drawing area and drag the pointing device in any direction to
start the objects moving in the direction that you’re dragging. Release the
button on the pointing device and the objects continue their orbit in the
direction that you specified. The speed of the cursor movement determines
the speed at which the objects spin.
You can change the direction of the continuous orbit by clicking and dragging
again. You can also change the display of the continuous orbit by right-clicking
in the drawing area and choosing an option from the shortcut menu. For
example, you can choose Visual Aids
➤
Grid to add a grid to the view without
exiting Continuous Orbit.
3DDISTANCE
Starts the interactive 3D view and makes objects appear closer or farther away
3D Orbit toolbar:
28 | Chapter 2