manualshive.com logo in svg

Autodesk AUTOCAD 2006, Command Reference Manual, Page: 665 / 1490

Share
Download
Autodesk AUTOCAD 2006 Command Reference Manual Download Page 665

selection dialog box), in which you can select the previously published
DWF to overwrite it, or you can enter a new name for the DWF file. When
you click Select, the previously published DWF file is overwritten or a new
DWF file is created that contains any changes you made to the drawing file
geometry and the status of the markups.

Restore Initial Markup View

If you panned or zoomed the selected markup, or rotated the view in model
space, restores the original view of the selected markup.

Save Markup History Changes

Saves changes to the status of markups and added comments to the
marked-up DWF file.

Republish Markup DWF

Provides options for republishing the marked-up DWF file. If any sheets were
added to the DWF file in Autodesk

®

 DWF Composer, those sheets will not be

included in the republished DWF file.

View Redline Geometry

Displays or hides redline markup geometry in the drawing area. When this
button is displayed as selected, redline markup geometry is displayed in the
drawing area.

View DWG Geometry

Displays or hides the originating drawing file in the drawing area. When this
button is displayed as selected, the drawing file is displayed in the drawing
area.

View DWF Geometry

Displays or hides the DWF file geometry in the drawing area. When this button
is displayed as selected, the DWF file geometry is displayed in the drawing
area.

Markup Set Manager | 641

Summary of Contents for AUTOCAD 2006



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments