Autodesk AUTOCAD 2006, Command Reference Manual, Page: 538 / 1490

[Use current origin/Set new origin/bottom Left/bottom Right/top rIght/top
lEft/Center] <current>: Enter an option, or press ENTER to accept the default and
return to the previous prompt
Set new origin
Specifies the new hatch origin point directly.
Default to boundary extents
Calculates a new origin based on the rectangular extents of the hatch.
Choices include each of the four corners of the extents and its center. Also
can store the value of the new hatch origin in the HPORIGIN system
variable.
HATCHEDIT
Modifies an existing hatch or fill
Modify II toolbar:
Modify menu: Object
➤
Hatch
Shortcut menu: Select a hatch object to edit, and right-click in the drawing
area. Click Hatch Edit.
Command line: hatchedit
Select hatch object: Use an object selection method
The Hatch Edit Dialog Box is displayed.
If you enter -hatchedit at the Command prompt, HATCHEDIT displays
HATCHEDIT Command Line.
Hatch Edit Dialog Box
Modify menu: Object
➤
Hatch
Shortcut menu: Select a hatch object to edit, right-click in the drawing area,
and choose Hatch Edit.
Command line: hatchedit
514 | Chapter 10