Autodesk AUTOCAD 2006, Command Reference Manual, Page: 543 / 1490

Use current origin
Sets the value of the HPORIGINMODE system variable. The last 5 options
listed below correspond to the values 1-5.
[Use current origin/Set new origin/bottom Left/bottom Right/top rIght/top
lEft/Center] <current>: Enter an option, or press ENTER to accept the default and
return to the previous prompt
Set new origin
Specifies the new hatch origin point directly.
Default to boundary extents
Calculates a new origin based on the rectangular extents of the hatch.
Choices include each of the four corners of the extents and its center. Also
can store the value of the new hatch origin in the HPORIGIN system
variable.
HELP
Displays Help
Standard toolbar:
Help menu: Help
Command line: help or ? or press F1 (or 'help for transparent use)
To display Help for a menu, open the menu, and then press F1 .
Pressing F1 or entering 'help while a command is active displays Help for
that command. Choosing the Help button in a dialog box displays Help for
that dialog box.
HIDE
Regenerates a three-dimensional wireframe model with hidden lines suppressed
Render toolbar:
HATCHEDIT Command Line | 519